Crosskleding

BUZZ PRO WFS KIT BLACK - 3PW1998100/05

The Bionic Neck Support Tech 2 is constructed from an advanced, high-performance carbon polymer compound and is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring Alpinestars’ exclusive and revolutionary rear stabilizer for progressive force relief (PFR) the BNS Tech 2 is designed for use in motocross and off-road riding and offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system.

- Complete new design and technical evolution including new lightweight rear section, chest padding and updated chin-plate design.
- Structural integrity and frame strength against heavy impact energies during a crash.
- Ultra-lightweight performance and comfort while riding.
- Reduced weight with no compromise on strength and rigidity.
- Resilience to low temperatures, below 0°C.
- Designed to provide a customizable, secure and personalized fit with the SAS (Size -Adapter System) for a versatile fitment in size ranges XS-M and L-XL.
- The Lycra®-laminated foam padding kits are adaptable and the interchangeable EVA foam pads allow compatibility with body protection systems.
- The lightweight Strap System can be worn over or under the jersey.
- Incorporates a bio-organic engineering design for superb ergonomics: Rear stabilizer - promotes PFR (Progressive Force Relief) and dissipates energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via pivot key.
- Frame construction promotes improved contact with helmet during impact – including rear support edge that fits closer to the body, extra width to account for different helmet - sizes and raised chest to reduce hyper-flexion.
- Innovative quick-release locking system for rapid and efficient fitting/removal offers secure and convenient closure.
- Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight.

6500019

The Bionic Neck Support Tech 2 is constructed from an advanced, high-performance carbon polymer compound and is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring Alpinestars’ exclusive and revolutionary rear stabilizer for progressive force relief (PFR) the BNS Tech 2 is designed for use in motocross and off-road riding and offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system.

- Complete new design and technical evolution including new lightweight rear section, chest padding and updated chin-plate design.
- Structural integrity and frame strength against heavy impact energies during a crash.
- Ultra-lightweight performance and comfort while riding.
- Reduced weight with no compromise on strength and rigidity.
- Resilience to low temperatures, below 0°C.
- Designed to provide a customizable, secure and personalized fit with the SAS (Size -Adapter System) for a versatile fitment in size ranges XS-M and L-XL.
- The Lycra®-laminated foam padding kits are adaptable and the interchangeable EVA foam pads allow compatibility with body protection systems.
- The lightweight Strap System can be worn over or under the jersey.
- Incorporates a bio-organic engineering design for superb ergonomics: Rear stabilizer - promotes PFR (Progressive Force Relief) and dissipates energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via pivot key.
- Frame construction promotes improved contact with helmet during impact – including rear support edge that fits closer to the body, extra width to account for different helmet - sizes and raised chest to reduce hyper-flexion.
- Innovative quick-release locking system for rapid and efficient fitting/removal offers secure and convenient closure.
- Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight.

6500019-105

Incorporating an evolved chassis constructed from an innovative, advanced fiber-glass compound for improved performance, the Bionic 7 Knee Brace is a versatile, fully CE certified knee brace. Designed for the stresses of off-road riding, the Bionic 7 provides support and helps protect from hyper-extension in the event of a crash. Lightweight, ventilated and highly customizable this brace offers a personalized and secure fit.

• The innovative design and optimized material utilization of the exoskeleton frame constructions make the knee braces extremely lightweight while still providing higher structural strength and support.
• Extremely temperature resilient: knee brace performs at temperatures as low as -20°C (-4°F).
• Correct position of knee cup is secured accurately in place by an innovative integrative mechanical guiding system allowing multi-directional freedom of movement.
• Highly ventilated: channeled padding and mesh zones for optimized ventilation and airflow.
• Soft comfortable lateral knee padding to avoid pressure points.
• Additional space padding and additional condyle pads enable a high adjustability for best personal fitment.
• Lightweight single straps on upper frames and buckle system promotes secure fitment of the brace in all riding positions and supports rapid and effortless mounting.
• The newly developed C-Frame strap system holds braces perfectly in position and avoids slipping down when rider is in action and extreme movement. Two straps are linked with a semi-rigid C-shaped connector that dynamically shapes towards the dimension change of calf muscle and added optional padding provides maximum comfort.
• Lightweight single straps on upper frames and buckle system promotes secure fitment of the brace in all riding positions and supports rapid and effortless mounting.
• The newly developed C-Frame strap system holds braces perfectly in position and avoids slipping down when rider is in action and extreme movement. Two straps are linked with a semi-rigid C-shaped connector that dynamically shapes towards the dimension change of calf muscle and added optional padding provides maximum comfort.

• Knee pivot system: new double-pivoting hinge system incorporating tool-free, fast, easily exchangeable extension stops (0, 5, 10, 15, 20, 25 and 30 degrees) to prevent hyper-extension injuries.

6501319

Constructed from an innovative advanced carbon polymer compound for improved strength and performance, the Bionic 10 Carbon Knee Brace helps reduce the risk and severity of injury by preventing excessive hypertension of the knee in an accident. Thanks to innovative engineering the Fluid Tech is ultra-lightweight and offers a highly customizable and secure fit, while affording improved directional movement of the knee articulation while riding.

• The innovative design and optimized material utilization of the exoskeleton frame constructions make the knee braces extremely lightweight while still providing higher structural strength and support.
• Extremely temperature resilient: knee brace performs at temperatures as low as -20°C (-4°F).
• Correct position of knee cup is secured accurately in place by an innovative integrative mechanical guiding system allowing multi-directional freedom of movement.
• Highly ventilated: channeled padding and mesh zones for optimized ventilation and airflow.
• Soft comfortable lateral knee padding to avoid pressure points.
• Additional space padding and additional condyle pads enable a high adjustability for best personal fitment.
• Lightweight single straps on upper frames and buckle system promotes secure fitment of the brace in all riding positions and supports rapid and effortless mounting.
• The newly developed C-Frame strap system holds braces perfectly in position and avoids slipping down when rider is in action and extreme movement. Two straps are linked with a semi-rigid C-shaped connector that dynamically shapes towards the dimension change of calf muscle and added optional padding provides maximum comfort.

• Knee pivot system: new double-pivoting hinge system incorporating tool-free, fast, easily exchangeable extension stops (0, 5, 10, 15, 20, 25 and 30 degrees) to prevent hyper-extension injuries.

6500319

Constructed from an innovative advanced carbon polymer compound for improved strength and performance, the Bionic 10 Carbon Knee Brace helps reduce the risk and severity of injury by preventing excessive hypertension of the knee in an accident. Thanks to innovative engineering the Fluid Tech is ultra-lightweight and offers a highly customizable and secure fit, while affording improved directional movement of the knee articulation while riding.

• The innovative design and optimized material utilization of the exoskeleton frame constructions make the knee braces extremely lightweight while still providing higher structural strength and support.
• Extremely temperature resilient: knee brace performs at temperatures as low as -20°C (-4°F).
• Correct position of knee cup is secured accurately in place by an innovative integrative mechanical guiding system allowing multi-directional freedom of movement.
• Highly ventilated: channeled padding and mesh zones for optimized ventilation and airflow.
• Soft comfortable lateral knee padding to avoid pressure points.
• Additional space padding and additional condyle pads enable a high adjustability for best personal fitment.
• Lightweight single straps on upper frames and buckle system promotes secure fitment of the brace in all riding positions and supports rapid and effortless mounting.
• The newly developed C-Frame strap system holds braces perfectly in position and avoids slipping down when rider is in action and extreme movement. Two straps are linked with a semi-rigid C-shaped connector that dynamically shapes towards the dimension change of calf muscle and added optional padding provides maximum comfort.

• Knee pivot system: new double-pivoting hinge system incorporating tool-free, fast, easily exchangeable extension stops (0, 5, 10, 15, 20, 25 and 30 degrees) to prevent hyper-extension injuries.

6500419

Incorporating a new, innovative grid protection technology that is lightweight and ventilated, this versatile jacket has CE-certified protectors incorporated into the slim fit, stretchable material for high levels of comfort. Compatible with Alpinestars Bionic Neck Support and with Bionic Hydration Pack.

• Slim fit stretchable fabric for a comfortable fit.
• Features a floating, highly ventilated and flexible rigid Chest Protector
• with flexible side wings that adapt to the rider’s body.
• Central front zipper for a better fit and ease of donning.
• Additional front padding on the arms, sides and chest for enhanced roost protection.
• High abrasion resistant fabric on the arms over the protectors for additional protection.
• Height adjustable kidney belt for optimal levels of fit.
• BNS compatible with a removable back puck panel and elastic BNS cords on the shoulders straps.
• New Cell Technology back protector is highly ventilated and flexible for enhanced rider comfort.
• Bionic Hydration Pack compatible.

6506520

Premium materials combined with innovative design create a protector that is light, ergonomic and extremely durable. Constructed from a breathable stretch mesh it offers high levels of ventilation while keeping the protection close to the rider’s body. Compatible with Alpinestars BNS and with Bionic Hydration Pack.

• Slim fit stretchable fabric construction.
• Features a floating, highly ventilated and flexible thermoformed Chest
• Protector for comfort and freedom of movement on the bike.
• Central front zipper for a better fit and ease of donning.
• Additional front padding on the arms and chest for enhanced roost protection.
• Height adjustable kidney belt for an optimal fit.
• BNS compatible with a removable back puck panel and elastic BNS cords on the shoulders straps.
• New Cell Technology back protector that is highly ventilated and flexible.
• Bionic Hydration Pack compatible.

6506620

Ultra lightweight and highly ventilated, the Bionic Plus Jacket features an advanced stretch mesh construction for a secure, comfortable fit. Tested by Marc Coma, this jacket features certified protectors for excellent resistance to impact and shock abrasion and is fully compatible with Alpinestars Bionic Neck Support. - Technical, Elastan stretch mesh main construction is highly breathable and retains shape.
- Reduced material construction on underarms and arms for ventilation and weight saving.
- Slim-lined, certified elbow/forearm protectors provide excellent impact protection and are asymmetric to offer optimized left/right fit.
- Chest and back panels feature triple-layer EVA compound padding for good shock absorption and padding.
- Removable upper chest and back padded panels accommodate fitment of Alpinestars BNS.
- Thermoformed kidney protector padding.
- Premium, auto-locking YKK zips for main frontal closure and on detachable sleeves to ensure secure fitting.
- Silicone printed logos throughout to help keep jersey in place.
- Convenient pull tab loops on shoulders for secure fitment of Alpinestars BNS.

6506716

Ergonomically profiled for an optimized fit and with level 1 CE certified protection securely held in position via a dual strap closure system, the Bionic Plus Knee Protector incorporates 3D mesh and vented panels to prevent the build-up of heat. With an asymmetric and lightweight design plus strategic flexion channeling, this knee protector provides high levels of freedom of movement and comfort.

• Asymmetrical and lightweight ergonomic panel construction offers extended protection surfaces to reduce rotation.
• Dual strap closure system on Knee Protectors specially designed to offer more comfort and adjustment, with top strap mounted above the knee and lower strap positioned for ergonomic fit.
• Vented panels and 3D mesh material give comfort to the rider, preventing heat build-up while maintaining tactile contact with skin.
• Designed with a flexion channel through the shell that allows the shell to bend with the knee.

• CE certified protection systems utilizing robust protective structures and impact absorption padding.
• Highly ergonomic design improves streamlining while providing crucial protection for MX and off-road riding.

6506219

With ergonomically profiled Level 1 CE certified protection securely held in position via a dual strap closure system, the Bionic Plus Elbow Protector incorporates 3D mesh and vented panels to prevent the build-up of heat. With an asymmetric and lightweight design plus strategic flexion channeling, this elbow protector provides high levels of freedom of movement and comfort.

• New padding construction and profiles on the upper part to have a better flexibility and reduce any material wrinkles.
• The Duel Strap system with hook and loop closures for rapid and easy mounting.
• Dual strap closure system on Elbow Protectors specially designed to offer more comfort and adjustment, with top strap mounted above the elbow and lower strap positioned for ergonomic fit.
• Vented panels and 3D mesh material give comfort to the rider, preventing heat build-up while maintaining tactile contact with skin.
• Designed with a flexion channel through the shell that allows the shell to bend with the elbow.
• CE certified protection systems utilizing robust protective structures and impact absorption padding.
• Highly ergonomic design improves streamlining while providing crucial protection for MX and off-road riding.
• Asymmetrical and lightweight ergonomic panel construction offers extended protection surfaces to reduce rotation.

6506119

Ergonomically profiled for an optimized youth fit and with level 1 CE certified protection securely held in position via a dual strap closure system, the Youth Bionic Plus Knee Protector incorporates 3D mesh and vented panels to prevent the build-up of heat. With an asymmetric and lightweight design plus strategic flexion channeling, this knee protector provides high levels of freedom of movement and comfort.

• Vented panels and 3D mesh material give comfort to the rider, preventing heat build-up while maintaining tactile contact with skin.
• Designed with a flexion channel through the shell that allows the shell to bend with the knee.
• CE certified protection systems utilizing robust protective structures and impact absorption padding.
• Highly ergonomic design improves streamlining while providing crucial protection for MX and off-road riding.
• Asymmetrical and lightweight ergonomic panel construction offers extended protection surfaces to reduce rotation.
• Dual strap closure system on Knee Protectors specially designed to offer more comfort and adjustment, with top strap mounted above the knee and lower strap positioned for ergonomic fit.

6546219-10