Crosskleding

The Bionic Neck Support Tech 2 is constructed from an advanced, high-performance carbon polymer compound and is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring Alpinestars’ exclusive and revolutionary rear stabilizer for progressive force relief (PFR) the BNS Tech 2 is designed for use in motocross and off-road riding and offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system.

- Complete new design and technical evolution including new lightweight rear section, chest padding and updated chin-plate design.
- Structural integrity and frame strength against heavy impact energies during a crash.
- Ultra-lightweight performance and comfort while riding.
- Reduced weight with no compromise on strength and rigidity.
- Resilience to low temperatures, below 0°C.
- Designed to provide a customizable, secure and personalized fit with the SAS (Size -Adapter System) for a versatile fitment in size ranges XS-M and L-XL.
- The Lycra®-laminated foam padding kits are adaptable and the interchangeable EVA foam pads allow compatibility with body protection systems.
- The lightweight Strap System can be worn over or under the jersey.
- Incorporates a bio-organic engineering design for superb ergonomics: Rear stabilizer - promotes PFR (Progressive Force Relief) and dissipates energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via pivot key.
- Frame construction promotes improved contact with helmet during impact – including rear support edge that fits closer to the body, extra width to account for different helmet - sizes and raised chest to reduce hyper-flexion.
- Innovative quick-release locking system for rapid and efficient fitting/removal offers secure and convenient closure.
- Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight.

6500019-105

De Accuri 2 keert terug om de norm te stellen voor een hoogwaardige bril. Biedt maximale bescherming, zichtbaarheid en comfort voor zicht naar lijn tijdens het rijden, met een steeds breder gezichtsveld dan ooit tevoren.

Verbeterde montage en afdichting met groter gezichtsveld
Ondersteunt drievoudige afscheurstiften voor een veilige montage
Ultradik drielaags gezichtsschuim absorbeert zweet
45 mm brede band met siliconencoating voor maximale grip
9-punts lensbevestigingssysteem bevestigt de lens in het frame
Verfraaiing van het Slash-logo
Lens van polycarbonaat met anticondens coating voor helder zicht
Racecraft 2 / Accuri 2 / Strata 2 gebruiken dezelfde lens en tear-offs

- 49 2110113

The Bionic Neck Support Tech 2 is constructed from an advanced, high-performance carbon polymer compound and is designed to help prevent injury in a crash situation by dissipating and diverting impact forces away from the neck and spine. The BNS functions when the rider’s helmet makes contact with the frame at the moment of a crash, thus providing a clean, solid surface which instantly channels damaging, compressive impact energy away from the neck and on to the BNS. Featuring Alpinestars’ exclusive and revolutionary rear stabilizer for progressive force relief (PFR) the BNS Tech 2 is designed for use in motocross and off-road riding and offers a highly personalized and stable fit while incorporating innovative new features such as a new quick release locking system.

- Complete new design and technical evolution including new lightweight rear section, chest padding and updated chin-plate design.
- Structural integrity and frame strength against heavy impact energies during a crash.
- Ultra-lightweight performance and comfort while riding.
- Reduced weight with no compromise on strength and rigidity.
- Resilience to low temperatures, below 0°C.
- Designed to provide a customizable, secure and personalized fit with the SAS (Size -Adapter System) for a versatile fitment in size ranges XS-M and L-XL.
- The Lycra®-laminated foam padding kits are adaptable and the interchangeable EVA foam pads allow compatibility with body protection systems.
- The lightweight Strap System can be worn over or under the jersey.
- Incorporates a bio-organic engineering design for superb ergonomics: Rear stabilizer - promotes PFR (Progressive Force Relief) and dissipates energy loads by transmitting them across the back and shoulders and away from spine (thoracic vertebrae), and is connected to the frames via pivot key.
- Frame construction promotes improved contact with helmet during impact – including rear support edge that fits closer to the body, extra width to account for different helmet - sizes and raised chest to reduce hyper-flexion.
- Innovative quick-release locking system for rapid and efficient fitting/removal offers secure and convenient closure.
- Compressed EVA foam compound padding to distribute the impact force over the widest area, yet remain lightweight.

6500019

Elastic 2-layer rain jacket
Breathable, elastic dual-layer exterior material
Taped, waterproof seams
Windproof, waterproof and breathable due to upper, 2-layer performance material
Reflective panels for greater safety
Jacket and waistband with rubber cord
Seat strip on the jacket
Elastic outer material
Mesh lining
Several outer pockets
KTM TPR zip-pull
10.000 mm water column

3PW220003302

Elastic 2-layer rain pants
Breathable, elastic dual-layer exterior material
Taped, waterproof seams
Windproof, waterproof and breathable due to upper, 2-layer performance material
Jacket and waistband with rubber cord
Elastic outer material
Mesh lining
Several outer pockets
KTM TPR zip-pull
10.000 mm water column

3PW220003402

Lightweight, ventilated body protector
Perforated ventilation zones
Three-dimensional shape
Optimized wear comfort
Can be combined with Bionic Tech 2 Neck Brace
Exclusively for KTM by Alpinestars
50 % EVA / 35 % polyester / 7 % polyamide / 5 % other / 3 % silicon

3PW230007702

The system is also extremely easy to use, just zip up the vest, close the magnetic flap and you’re ready to ride.
Shoulder protection is critical in a road impact and riders’ shoulders are uniquely protected by Tech-Air®, effectively and efficiently minimizing the risk of the rider sustaining shoulder and collarbone injuries.
The impact absorption while wearing the airbag results in a decrease of the impact force by up to 93% compared to a passive protector.
The state-of-the-art Tech-Air® 5 vest comes with an active electronic system that features six integrated sensors (3 gyroscopes and 3 accelerometers) and a crash algorithm that leverages AI to accurately monitor when to deploy the airbag in the event of a crash. The intelligent crash detection algorithm has been developed together with the world’s top MotoGP riders, and Alpinestars customers, and includes over 2,000 crashes of data to accurately assess when to deploy a full airbag inflation before the first impact with an obstacle.
An LED display indicates the airbag’s operational status.
Integrated sensors: Should the algorithm detect the start of a crash, it will deploy a protective airbag, with a maximum inflation time of 45ms.
Lithium ion battery has a battery life of 30 hours of riding time.
Tech-Air® 5 offers unrivaled upper body protection, keeping motorcycle riders safe by uniquely covering the shoulders, chest, ribs and full back.
Tech-Air® 5 is a slim, self-contained wearable airbag vest that can be worn under any proper fitting textile jacket or Tech-Air® compatible jacket.
Tech-Air® 5 has Bluetooth connectivity and an accompanying Tech-Air® App, which uses the rider’s phone to display the system’s operational status, battery status and a detailed analysis of a ride.
Technology

3PW230003602

Nieuwste Laarzen van acerbis de x team nu verkrijgbaar Beschermende laarzen die extreem licht zijn Knip en slijtvast bovenwerk Hielbescherming in elastomeer materiaal voor verbeterd comfort en schokabsorptie Gedifferentieerde structuur TPU-inserts in het gebied van de tibia, enkel en versnellingsverandering voor maximale bescherming 4-karaats sluiting met gespen voor micrometrische aanpassing en klittenband op de stofhoes. Hittebescherming in suède Gaiter- en tibiaalplooien in zacht gesneden en slijtvaste microfiber Zeer slijtvaste rubberen zool met dubbele dichtheid Interieur gemaakt van 3D Mesh voor meer comfort en absorptie van zweet CERTIFICATIE EN 13634: 2015 - volledig overschrijdt de 3 homologatieniveaus (NIVEAU 2) laarzen acerbis x team laarzen

Pro Line knee brace Maat: Medium

Designed and developed for those little rippers, the Tech 3S Youth Boot offers high levels of protection and comfort, and with a lightweight microfiber upper these boots are highly durable – ideal for protecting young riders as they learn to ride emulate their heroes.

2014518-1176-10 (blk/bl/pnk)
2014518-12-10 (blk/wht)
2014518-125-10 (blk/wht/yllw)
2014518-1231-10 (blk/wht/rd)

Featuring a unique, high strength sole construction offering durability and protective performance the Tech 7S Boot has been specifically developed for youth or smaller framed riders. With class-leading protection, innovative performance features such as pivot system to movement and flexibility the Tech

2015017-1124-4 (gr/wht/org)
2015017-1133-4 (drk gry/rd)
2015017-12-4 (blck/wht)
2015017-1241-4 (blk/wht/org)
2015017-155-4 (blk/yllw)
2015017-1829-4 (blk/slvr/wht/gld)
2015017-5561-4 (yllw/grn/blk)
2015017-9058-4 (gry/rd/yllw)

Warmth Without the Weight Mother Nature has met her match with this low profile glove engineered to keep you going fast in cooler weather. Get the perfect amount of insulation to block out damp, cool temperatures while maintaining exceptional dexterity and control of your bike. These work well for those cold trail exploring or maintenance days. Features Neoprene cuff gives a streamlined look while offers maximum durability and comfort. Adjustable TPR wrist closure with hook and loop backing ensures proper fit. Lightly insulated soft-shell top hand provides protection against colder temps. Moisture wicking microfiber interior provides the perfect level of insulation. Reflective graphics on top of hand offer a clean look with improved visibility. Single layer Clarion palm for premium comfort and performance. Silicone printed palm graphics increase grip in damp conditions. Integrated tech thread keeps you connected with your devices. - 49 765410